LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2018 >> Mustang GT, Automatic Trans >> Repair and Diagnosis (Single Page) >> Drivelines & Axles >> Differentials & Drive Axles >> Rear Drive Axle/Differential >> Removal And Installation >> Drive Pinion Seal >> Removal

Drive Pinion Seal: Removal

  1. Remove the drive pinion flange. Refer to: Drive Pinion Flange .
  2. Using a flat blade screwdriver, remove and discard the drive pinion seal. Use the General Equipment: Flat Headed Screw Driver
GFD284711Courtesy of FORD MOTOR COMPANY
scientia non olet · About LEMON Manuals