LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2018 >> Mustang GT, Automatic Trans >> Repair and Diagnosis (Single Page) >> Brakes >> Mechanical - Hydraulic >> Rear Disc Brake >> Removal And Installation >> Rear Brake Disc - Vehicles With: SVT Performance Package >> Installation

Rear Brake Disc - Vehicles With: SVT Performance Package: Installation

  1. To install, reverse the removal procedure.
  2. Clean the brake disc mating surfaces using a wire brush and the specified material.

    Material: Motorcraft® Metal Brake Parts Cleaner / PM-4-A, PM-4-B

  3. Apply the brake pedal several times to verify correct brake system operation.
scientia non olet · About LEMON Manuals