LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2018 >> Mustang GT, Automatic Trans >> Repair and Diagnosis (Single Page) >> Body & Frame >> Seats >> Rear Seats >> Removal And Installation >> Rear Seat Backrest Cover - Coupe >> Removal

Rear Seat Backrest Cover - Coupe: Removal

  1. Remove the rear seat backrest. Refer to: Rear Seat Backrest - Coupe .
    NOTE: LH seat shown, RH seat similar.
  2. Release the backrest lower J-clip.
    GFD289682Courtesy of FORD MOTOR COMPANY
  3. NOTE: Use care when separating the seat backrest cover from the hook-and-loop strips, or the hook-and-loop strips may be torn from the seat backrest foam pad.

    Separate the backrest cover hook-and-loop strips from the backrest foam. Position the backrest latch strap through the backrest cover. Remove the backrest cover.

GFD289683Courtesy of FORD MOTOR COMPANY