Luggage Compartment Lid Latch - Coupe: Removal

NOTE: Removal steps in this procedure may contain installation details.

1. Remove the luggage compartment lid emergency release handle.
   1. Press down the luggage compartment lid emergency release handle retaining tab.
   2. Remove the luggage compartment lid emergency release handle.

   Courtesy of FORD MOTOR COMPANY

2. Remove the luggage compartment lid latch cover.
   1. Insert a flat blade screwdriver between the luggage compartment lid latch cover and luggage compartment lid latch.
   2. Remove the luggage compartment lid latch cover while gently prying the cover away from the luggage compartment lid latch disengaging the luggage compartment lid latch cover from the tab on luggage compartment lid latch. Use the General Equipment: Flat-Bladed Screwdriver

   Courtesy of FORD MOTOR COMPANY

3. Remove luggage compartment lid trim panel.
   1. Remove the luggage compartment lid bump stop rubbers.
   2. Remove the retainers and remove the luggage compartment lid trim panel.

   Courtesy of FORD MOTOR COMPANY

4. Remove the luggage compartment lid latch.
   1. Disconnect the electrical connector and position aside the wiring harness.
   2. Remove the nuts and the luggage compartment lid latch.

      Torque

      : 62 lb.in (7 Nm)

Courtesy of FORD MOTOR COMPANY