LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2018 >> Fusion Titanium, FWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 40 (ELECTRONIC ENGINE CONTROLS SYSTEM - 2.0L DURATEC - HYBRID/ENERGI (103kW/140PS) (UA)) >> Removal And Installation >> Camshaft Position (CMP) Sensor >> Installation

Camshaft Position (CMP) Sensor: Installation

WARNING: This page is about a different variant/trim than selected.
  1. Apply the specified lubricant to the specified component.

    Material: Motorcraft ® SAE 5W-20 Synthetic Blend Motor Oil / XO-5W20-QSP (WSS-M2C945-A)

    Torque: 53 lb.in (6 Nm)

    GFD198157Courtesy of FORD MOTOR COMPANY
  2. Refer to: Air Cleaner .
scientia non olet · About LEMON Manuals