LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2018 >> Fusion Titanium, AWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 97 (ENGINE COOLING SYSTEM - 2.0L DURATEC - HYBRID/ENERGI (103kW/140PS) (UA)) >> Removal And Installation >> Thermostat >> Removal

Removal And Installation: Thermostat: Removal

WARNING: This page is about a different variant/trim than selected.
NOTE: Removal steps in this procedure may contain installation details.
  1. WARNING: Before beginning any service procedure in this article, refer to Safety Warnings in General Information. Failure to follow this instruction may result in serious personal injury.

    Refer to: Engine Cooling System Health and Safety Precautions .

  2. Refer to: Cooling System Draining, Filling and Bleeding .
  3. NOTE: Be prepared to capture escaping fluid.

    Torque: 89 lb.in (10 Nm)

    GFD198086Courtesy of FORD MOTOR COMPANY
  4. GFD198087Courtesy of FORD MOTOR COMPANY