LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2018 >> Fusion Titanium, AWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 97 (ENGINE COOLING SYSTEM - 2.0L DURATEC - HYBRID/ENERGI (103kW/140PS) (UA)) >> Removal And Installation >> Degas Bottle >> Removal

Degas Bottle: Removal

WARNING: This page is about a different variant/trim than selected.
NOTE: Removal steps in this procedure may contain installation details.
  1. WARNING: Before beginning any service procedure in this article, refer to Safety Warnings in General Information. Failure to follow this instruction may result in serious personal injury.

    Refer to: Engine Cooling System Health and Safety Precautions .

  2. GFD198090Courtesy of FORD MOTOR COMPANY
  3. Use the General Equipment: Hose Clamp(s)
    GFD198091Courtesy of FORD MOTOR COMPANY
  4. Torque: 80 lb.in (9 Nm)
    GFD198092Courtesy of FORD MOTOR COMPANY