LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2018 >> Fusion Titanium, AWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 97 (ENGINE COOLING SYSTEM - 2.0L DURATEC - HYBRID/ENERGI (103kW/140PS) (UA)) >> Description And Operation >> Engine Cooling - Component Location >> Exploded View Of Engine Cooling System (PHEV)

Exploded View Of Engine Cooling System (PHEV)

WARNING: This page is about a different variant/trim than selected.

PHEV 

GFD198060Courtesy of
Item Description
1 Heater core
2 Heater inlet hose assembly
3 Heater hose assembly
4 Heater coolant control valve inlet hose assembly
5 Auxiliary heater assembly
6 Heater coolant control valve
7 Heater pump assembly-to-auxiliary heater assembly hose
8 Heater pump assembly
9 Pressure relief cap
10 Degas bottle
11 Lower radiator hose
12 Cylinder block
13 Cylinder block coolant pump hole cover assembly
14 Cylinder head gasket
15 Cylinder head
16 Coolant outlet connector adapter assembly-to-degas bottle hose and connector
17 Exhaust gas recirculation (EGR) valve
18 Coolant outlet connector adapter assembly
19 Heater outlet hose assembly
20 Upper radiator hose
21 Radiator
22 Thermostat housing
23 Coolant pump inlet hose
24 Coolant pump
25 Coolant pump outlet hose
26 Radiator-to-degas bottle hose