LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2018 >> Fusion Titanium, AWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 40 (Charging System (Battery, Battery Mounting And Battery Cables) - Fusion (Hybrid/ENERGI)) >> General Procedures >> Battery Disconnect and Connect

Battery Disconnect and Connect

WARNING: This page is about a different variant/trim than selected.

Disconnect 

  1. WARNING: Before beginning any service procedure, refer to Health and Safety Precautions . Failure to follow this instruction may result in serious personal injury.
    GFD198676Courtesy of FORD MOTOR COMPANY
    GFD198677Courtesy of FORD MOTOR COMPANY
  2. NOTE: When disconnecting the battery cable to interrupt power to the vehicle electrical system, disconnect the battery ground cable only. It is not necessary to disconnect the positive battery cable.

    1. Torque: 44 lb.in (5 Nm)
    2. Torque: 80 lb.in (9 Nm)

GFD198678Courtesy of FORD MOTOR COMPANY

Connect 

  1. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals