LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2018 >> Fusion Titanium, AWD >> Repair and Diagnosis >> Engine Mechanical >> Blowers, Superchargers & Turbochargers >> Engine Controls - Fuel Charging And Controls - Turbocharger - 2.0L ECOBOOST (184KW/250PS) - Mi4 >> Removal And Installation >> Wastegate Control Valve Solenoid >> Removal

Wastegate Control Valve Solenoid: Removal

  1. Disconnect the wastegate control valve solenoid hoses and the wastegate control valve solenoid electrical connector.

    Use the General Equipment: Hose Clamp Remover/Installer

    GFD193538Courtesy of FORD MOTOR COMPANY
  2. Remove and discard the wastegate control valve solenoid retainers and then remove the wastegate control valve solenoid.
GFD193539Courtesy of FORD MOTOR COMPANY
scientia non olet · About LEMON Manuals