LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2018 >> Fusion Titanium Hybrid >> Repair and Diagnosis >> Engine Mechanical >> Fuel System >> FUEL TANK AND LINES - 2.0L DURATEC - HYBRID/ENERGI (103kW/140PS) (UA) >> Removal And Installation >> Fuel Pump and Sender Unit >> Installation

Fuel Pump and Sender Unit: Installation

  1. NOTE: Make sure to install a new Fuel Pump and Sender Unit O-ring seal.
    NOTE: Make sure the alignment tabs on the Fuel Pump and Sender Unit and the fuel tank meet prior to tightening the Fuel Pump and Sender Unit lockring.

    To install, reverse the removal procedure.

scientia non olet · About LEMON Manuals