LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2018 >> Fusion Titanium Hybrid >> Repair and Diagnosis >> Accessories & Equipment >> Anti-Theft Systems >> Passive Anti-Theft System (Pats) - Fusion (Hybrid/ENERGI) >> Description And Operation >> Passive Anti-Theft System (PATS) - System Operation and Component Description >> System Operation >> Network Message Chart

Network Message Chart

BCM Network Input Messages 

Broadcast Message Originating Module Message Purpose
RKE data RTM The RTM sends the BCM programmed passive key information.
PATS start request target data PCM/ SOBDMC The PCM/ SOBDMC sends the BCM a challenge request for a valid ID.

PCM/ SOBDMC Network Input Messages 

Broadcast Message Originating Module Message Purpose
PATS control command BCM The response from the BCM supplying the PCM/ SOBDMC challenge ID. If the BCM ID response is incorrect, then PATS prevents the vehicle from starting.

IPC Network Input Messages 

Broadcast Message Originating Module Message Purpose
Vehicle mode BCM Used by the IPC to display No Key Detected when the START/STOP button is pressed and no programmed key is detected within the vehicle.
scientia non olet · About LEMON Manuals