LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2018 >> Fusion Sport >> Repair and Diagnosis >> Suspension >> Electronic Suspension >> Vehicle Dynamic Suspension System - Fusion (Except Hybrid) >> Removal And Installation >> Vehicle Dynamics Control Module (VDM) >> Installation

Vehicle Dynamics Control Module (VDM): Installation

  1. To install, reverse the removal procedure.
  2. Using a diagnostic scan tool, complete the PMI process for the VDM following the on-screen instructions.
  3. Calibrate the VDM. Connect the diagnostic scan tool and carry out the Ride Height Calibration routine. Follow the on-screen instructions.
scientia non olet · About LEMON Manuals