Pinpoint Test H : There Is An Active Park Assist Fault Message Displayed In The CENTERSTACK Infotainment Display And/Or In The IPC (Instrument Panel Cluster) Message Center Display: Notes
WARNING: This page is about a different variant/trim than selected.
Refer to Audio System/Navigation - Fusion With Touchscreen/Without Sony for schematic and connector information.
Refer to Module Communications Network for schematic and connector information.
Normal Operation and Fault Conditions
REFER to: Parking Aid - System Operation and Component Description .
Possible Causes
- Communication network concern
- PSCM concern
- SCCM concern
- ABS concern
- PCM concern
- RCM concern
- TRM concern
- FCIM concern
- IPC concern
- GWM concern
- APIM concern
- BCM
- PAM (integral to the BCM)