LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2018 >> Fusion S >> Repair and Diagnosis >> Suspension >> Rear Suspension >> Rear Suspension System - Fusion (Except Hybrid) >> Removal And Installation >> Wheel Studs >> Installation

Wheel Studs: Installation

  1. Press the wheel stud into the wheel bearing and wheel hub flange until fully seated.

    Use the General Equipment: Hydraulic Press

    GFD190274Courtesy of FORD MOTOR COMPANY
  2. Install the wheel bearing and wheel hub.

    Refer to: Wheel Bearing and Wheel Hub - FWD .

    Refer to: Wheel Bearing and Wheel Hub - AWD .

scientia non olet · About LEMON Manuals