LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2018 >> Fusion S >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 72 (ENGINE - 2.0L DURATEC - HYBRID/ENERGI (103kW/140PS) (UA)) >> Removal And Installation >> Variable Valve Timing (VVT) Unit >> Removal

Variable Valve Timing (VVT) Unit: Removal

WARNING: This page is about a different variant/trim than selected.
NOTE: Removal steps in this procedure may contain installation details.
  1. Refer to: Timing Drive Components .
  2. Do not tighten the camshaft phaser and sprocket and the exhaust camshaft sprocket at this time. The bolts will be tightened during the timing drive component installation procedure.
GFD197675Courtesy of FORD MOTOR COMPANY
scientia non olet · About LEMON Manuals