LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2018 >> Fusion S >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 72 (ENGINE - 2.0L DURATEC - HYBRID/ENERGI (103kW/140PS) (UA)) >> Removal And Installation >> Oil Pump Screen and Pickup Tube >> Installation

Oil Pump Screen and Pickup Tube: Installation

WARNING: This page is about a different variant/trim than selected.
  1. NOTE: A new gasket must be installed.
    GFD197735Courtesy of FORD MOTOR COMPANY
  2. Torque: 89 lb.in (10 Nm)
    GFD197733Courtesy of FORD MOTOR COMPANY
  3. Refer to: Oil Pan .
scientia non olet · About LEMON Manuals