LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2018 >> Fusion S >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 72 (ENGINE - 2.0L DURATEC - HYBRID/ENERGI (103kW/140PS) (UA)) >> Removal And Installation >> Oil Pressure Switch >> Removal

Oil Pressure Switch: Removal

WARNING: This page is about a different variant/trim than selected.
NOTE: Removal steps in this procedure may contain installation details.
  1. Refer to: Jacking and Lifting - Overview .
  2. GFD197575Courtesy of FORD MOTOR COMPANY
  3. Material: Motorcraft ® Thread Sealant with PTFE / TA-24-B (WSK-M2G350-A2)
GFD197732Courtesy of FORD MOTOR COMPANY
scientia non olet · About LEMON Manuals