LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2018 >> Fusion S >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 72 (ENGINE - 2.0L DURATEC - HYBRID/ENERGI (103kW/140PS) (UA)) >> Removal And Installation >> Oil Pan >> Removal

Oil Pan: Removal

WARNING: This page is about a different variant/trim than selected.
NOTE: During engine repair procedures, cleanliness is extremely important. Any foreign material (including any material created while cleaning gasket surfaces) that enters the oil passages, coolant passages or the oil pan can cause engine failure
  1. Refer to: Engine Front Cover - Plug-In Hybrid Electric Vehicle (PHEV) .
  2. WARNING: Be prepared to collect escaping fluid.

    Use the General Equipment: Oil Drain Equipment

    Torque: 20 lb.ft (27 Nm)

    GFD197619Courtesy of FORD MOTOR COMPANY
  3. GFD197657Courtesy of FORD MOTOR COMPANY
  4. GFD197658Courtesy of FORD MOTOR COMPANY