LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2018 >> Fusion S >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 72 (ENGINE - 2.0L DURATEC - HYBRID/ENERGI (103kW/140PS) (UA)) >> Removal And Installation >> Intake Manifold >> Installation

Intake Manifold: Installation

WARNING: This page is about a different variant/trim than selected.
  1. To install, reverse the removal procedure.
  2. Torque: 159 lb.in (18 Nm)
Fig 1: Intake Manifold Tightening Sequence
GFD197656Courtesy of FORD MOTOR COMPANY
scientia non olet · About LEMON Manuals