LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2018 >> Fusion S >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 72 (ENGINE - 2.0L DURATEC - HYBRID/ENERGI (103kW/140PS) (UA)) >> Removal And Installation >> Flywheel >> Removal

Removal And Installation: Flywheel: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Remove the transmission. Refer to: Transmission .
  2. Remove the RH splash shield. Refer to: Fender Splash Shield .
  3. Remove the bolts and the damper.
    GFD197644Courtesy of FORD MOTOR COMPANY
  4. Remove the bolts and the flywheel.

    • Discard the bolts.

GFD197645Courtesy of FORD MOTOR COMPANY