LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2018 >> Fusion S >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 72 (ENGINE - 2.0L DURATEC - HYBRID/ENERGI (103kW/140PS) (UA)) >> Removal And Installation >> Engine Mount >> Removal

Engine Mount: Removal

WARNING: This page is about a different variant/trim than selected.
NOTE: Removal steps in this procedure may contain installation details.
  1. Refer to: Air Cleaner . Refer to: Air Cleaner Outlet Pipe .
  2. Torque: 44 lb.in (5 Nm)
    GFD197648Courtesy of FORD MOTOR COMPANY
  3. GFD197725Courtesy of FORD MOTOR COMPANY
  4. GFD197726Courtesy of FORD MOTOR COMPANY
  5. Use Special Service Tool: 303-F072 Support Bar, Engine.
    GFD197608Courtesy of FORD MOTOR COMPANY
  6. Torque: 44 lb.in (5 Nm)
    GFD197727Courtesy of FORD MOTOR COMPANY
  7. Torque: 89 lb.in (10 Nm)
    GFD197693Courtesy of FORD MOTOR COMPANY
  8. Torque: 66 lb.ft (90 Nm)
GFD197728Courtesy of FORD MOTOR COMPANY