LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2018 >> Fusion S >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 40 (ELECTRONIC ENGINE CONTROLS SYSTEM - 2.0L DURATEC - HYBRID/ENERGI (103kW/140PS) (UA)) >> Removal And Installation >> Engine Coolant Temperature (ECT) Sensor - Plug-In Hybrid Electric Vehicle (PHEV) >> Removal

Engine Coolant Temperature (ECT) Sensor - Plug-In Hybrid Electric Vehicle (PHEV): Removal

WARNING: This page is about a different variant/trim than selected.
  1. WARNING: Before beginning any service procedure, refer to Safety Warnings in General Information. Failure to follow this instruction may result in serious personal injury.

    Refer to: Health and Safety Precautions .

  2. The Engine Coolant Temperature (ECT) Sensor (ECT2) is also known as Cabin Heater Coolant Temperature Sensor, Refer to: Cabin Heater Coolant Temperature Sensor - Plug-In Hybrid Electric Vehicle (PHEV) .