LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2018 >> Fusion Platinum, FWD >> Repair and Diagnosis >> Suspension >> Electronic Suspension >> Vehicle Dynamic Suspension System - Fusion (Except Hybrid) >> Removal And Installation >> Front Suspension Height Sensor >> Installation

Front Suspension Height Sensor: Installation

  1. NOTE: The RH and LH height sensor assemblies cannot  be used on opposite sides of the vehicle.

    To install, reverse the removal procedure.

  2. Calibrate the suspension height sensor. Connect the scan tool and carry out the Ride Height Calibration routine. Follow the scan tool directions.
scientia non olet · About LEMON Manuals