LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2018 >> Fusion Platinum, FWD >> Repair and Diagnosis >> Suspension >> Electronic Suspension >> Vehicle Dynamic Suspension System - Fusion (Except Hybrid) >> Diagnosis And Testing >> Vehicle Dynamic Suspension >> Pinpoint Tests >> Pinpoint Test C : P1758:19 >> Notes

Pinpoint Test C : P1758:19: Notes

Refer to Vehicle Dynamic Suspension for schematic and connector information.

Normal Operation and Fault Conditions 

Using input from the height sensors and HS-CAN messages, the VDM provides a varying current to the damper solenoid valves. The VDM is programmed with an upper limit for this current. One or more of the height sensors failing internally and damage or modifications to the vehicle suspension may cause this DTC to set in the VDM.

DTC Fault Trigger Conditions 

DTC Description Fault Trigger Conditions
P1758:19 Pressure Solenoid Control System Incorrect Current: Circuit Current Above Threshold This DTC sets in continuous memory if any of the damper solenoids request a current greater than or equal to 1.3 amps continually for more than 2 minutes.

Possible Sources 

scientia non olet · About LEMON Manuals