LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2018 >> Fusion Platinum, FWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 34 (Automatic Transmission - 6F50/6F55 - Fusion (Except Hybrid)) >> Removal And Installation >> Turbine Shaft Speed (TSS) Sensor >> Removal

Turbine Shaft Speed (TSS) Sensor: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Remove the main control cover. Refer to: Main Control Cover .
  2. Disconnect the TSS sensor.
    GFD194889Courtesy of FORD MOTOR COMPANY
  3. Remove the bolt and the TSS sensor.
    GFD194890Courtesy of FORD MOTOR COMPANY
scientia non olet · About LEMON Manuals