Roll Restrictor RH: Installation
WARNING: This page is about a different variant/trim than selected.
- Install the roll restrictor and bolts.
- Install the roll restrictor-to-subframe bolt.
Material: Motorcraft ® Threadlock and Sealer / TA-25-B
Torque: 129 lb.ft (175 Nm)
- Install the roll restrictor-to-roll restrictor bracket bolt.
Torque: 85 lb.ft (115 Nm)
- Install the roll restrictor-to-subframe bolt.
- Install the LH exhaust flexible pipe. Refer to: Exhaust Flexible Pipe .