Pinpoint Test B : Shift Solenoid B (SSB): Notes
WARNING: This page is about a different variant/trim than selected.
Refer to Transmission Controls - 6F50/6F55 for schematic and connector information.
Normal Operation and Fault Conditions
The PCM applies and releases the various clutches in the transmission by actuating the shift solenoids in the solenoid body. SSB is a Variable Force Solenoid (VFS).
DTC Fault Trigger Conditions
| DTC | Description | Fault Trigger Conditions |
|---|---|---|
| P0755 | SSB | Open circuit in the solenoid or wire harness. |
| P0758 | SSB Electrical | Open circuit in the solenoid or wire harness. |
| P0759 | SSB Intermittent | Intermittent circuit in the solenoid or wire harness open, shorted to ground or shorted to power. |
| P0976 | SSB Control Circuit Low | Short to ground in the solenoid or wire harness. |
| P0977 | SSB Control Circuit High | Open circuit or short to power in the solenoid or wire harness. |
Possible Sources
- Connectors damaged or pushed-out terminals, corrosion, loose wires and missing or damaged seals
- SSB
- Transmission internal wiring harness frame
- PCM