LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2018 >> Fusion Platinum, FWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 26 (Electronic Engine Controls System - 1.5L ECOBOOST (118KW/160PS) - I4) >> Removal And Installation >> Fuel Rail Pressure (FRP) Sensor >> Installation

Fuel Rail Pressure (FRP) Sensor: Installation

WARNING: This page is about a different variant/trim than selected.
  1. To install, reverse the removal procedure.
  2. Lubricate the sensor threads.

    Material: Motorcraft ® SAE 5W-20 Synthetic Blend Motor Oil / XO-5W20-QSP (WSS-M2C945-A)

    GFD193863Courtesy of FORD MOTOR COMPANY
scientia non olet · About LEMON Manuals