LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2018 >> Fusion Platinum, FWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 26 (Electronic Engine Controls System - 1.5L ECOBOOST (118KW/160PS) - I4) >> Removal And Installation >> Engine Coolant Temperature (ECT) Sensor >> Installation

Engine Coolant Temperature (ECT) Sensor: Installation

WARNING: This page is about a different variant/trim than selected.
  1. To install, reverse the removal procedure.
  2. Check the coolant level in the degas bottle and add coolant as necessary.

    Material: Motorcraft ® Orange Prediluted Antifreeze/Coolant / VC-3DIL-B (WSS-M97B44-D2)

    GFD193738Courtesy of FORD MOTOR COMPANY
scientia non olet · About LEMON Manuals