LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2018 >> Fusion Platinum, FWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 20 (Engine Cooling System - 2.7L ECOBOOST (238KW/324PS)) >> Removal And Installation >> Cooling Fan Motor and Shroud >> Removal

Cooling Fan Motor and Shroud: Removal

WARNING: This page is about a different variant/trim than selected.
NOTE: Removal steps in this procedure may contain installation details.
  1. Remove the cooling module. Refer to: Cooling Module .
  2. Remove the bolts and the cooling fan motor and shroud.

    Torque: 53 lb.in (6 Nm)

    GFD193313Courtesy of FORD MOTOR COMPANY
scientia non olet · About LEMON Manuals