LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2018 >> Fusion Platinum, FWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 136 (Starting System - 2.5L DURATEC (125KW/170PS)) >> Diagnosis And Testing >> Starting System >> Symptom Chart(s) >> Symptom Chart: Auto-Start-Stop System

Symptom Chart: Auto-Start-Stop System

WARNING: This page is about a different variant/trim than selected.

Diagnostics in this article assume a certain skill level and knowledge of Ford-specific diagnostic practices. REFER to: Diagnostic Methods .

Condition Possible Sources Actions
Auto-Start-Stop System is inoperative or does not operate correctly One or more required criteria required for Auto-start-stop operation has not been met. REFER to owners Guide Refer to ENGINE CONTROLS - SYMPTOM CHARTS (EXCEPT DIESEL & HYBRID) .
Electronic Control Modules
Vehicle Battery Refer to ENGINE CONTROLS - SYMPTOM CHARTS (EXCEPT DIESEL & HYBRID) .
Auto-Start-Stop System cannot be disabled by driver
  • Wiring, terminals or connectors
  • Auto-start-stop disable switch
  • Refer to the appropriate Information and Entertainment Systems article for the procedure.
FCIM