LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2018 >> Fusion Platinum, FWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 133 (Engine - 2.5L DURATEC (125KW/170PS)) >> Removal And Installation >> Oil Pump Screen and Pickup Tube >> Removal

Oil Pump Screen and Pickup Tube: Removal

WARNING: This page is about a different variant/trim than selected.
  1. With the vehicle in NEUTRAL, position it on a hoist. Refer to: Jacking and Lifting - Overview .
  2. Remove the oil pan. Refer to: Oil Pan .
  3. Remove the bolts and the oil pump screen and pickup tube.
    GFD192139Courtesy of FORD MOTOR COMPANY
  4. Remove and discard the gasket.
    GFD192140Courtesy of FORD MOTOR COMPANY