LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2018 >> Fusion Platinum, FWD >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Rear Disc Brake System - Fusion (Except Hybrid) >> Removal And Installation >> Rear Brake Disc >> Installation

Rear Brake Disc: Installation

  1. NOTE: Make sure that the brake hose is not twisted when installing the brake caliper or damage to the brake flexible hose may occur.

    To install, reverse the removal procedure.

  2. Deactivate the EPB service mode. Refer to: Electronic Parking Brake (EPB) Service Mode Activation and Deactivation .
  3. Apply the brake pedal several times to verify correct brake system operation.
scientia non olet · About LEMON Manuals