Symptom Chart: Stoplamps
Diagnostics in this article assume a certain skill level and knowledge of Ford-specific diagnostic practices. Refer to: Diagnostic Methods .
| Condition | Possible Sources | Actions |
|---|---|---|
| A module does not respond to the scan tool | Fuse Wiring, terminals or connectors Module |
Refer to: Communications Network . |
| All the stoplamps are inoperative | Refer to the Pinpoint Test | Go to PINPOINT TEST A |
| One or more stoplamps are inoperative | Refer to the Pinpoint Test | Go to PINPOINT TEST B |
| The stoplamps are on continuously | Refer to the Pinpoint Test | Go to PINPOINT TEST C |