LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2018 >> Fusion Energi Titanium >> Repair and Diagnosis >> Suspension >> Rear Suspension >> Rear Suspension System - Fusion (Hybrid/ENERGI) >> Removal And Installation >> Rear Wheel Studs >> Removal

Rear Wheel Studs: Removal

  1. Remove the wheel bearing and wheel hub. Refer to: Wheel Bearing and Wheel Hub - FWD . Refer to: Wheel Bearing and Wheel Hub - AWD .
  2. Press the wheel stud from the wheel bearing and wheel hub flange. Use the General Equipment: Hydraulic Press
    GFD197269Courtesy of FORD MOTOR COMPANY
  3. Visual check. Inspect the wheel bearing and wheel hub flange for corrosion or damage. Replace as necessary.
GFD197270Courtesy of FORD MOTOR COMPANY
scientia non olet · About LEMON Manuals