LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2018 >> Fusion Energi Titanium >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> ENGINE CONTROLS - FUEL CHARGING AND CONTROLS - 2.0L DURATEC - HYBRID/ENERGI (103kW/140PS) (UA) >> Removal And Installation >> Throttle Body >> Installation

Throttle Body: Installation

  1. GFD198122Courtesy of FORD MOTOR COMPANY
  2. Tighten in sequence displayed.

    Torque: 89 lb.in (10 Nm)

    Fig 1: Throttle Body Tightening Sequence
    GFD198123Courtesy of FORD MOTOR COMPANY
  3. When connecting the Throttle Body (TB) electrical connector engage the red connector locking tab after fully installing the Throttle Body (TB) electrical connector. The red tab will not slide forward unless the Throttle Body (TB) electrical connector is fully installed.
    GFD198124Courtesy of FORD MOTOR COMPANY
  4. Refer to: Air Cleaner Outlet Pipe .