Thermostat Housing: Removal
NOTE:
Removal steps in this procedure may contain installation details.
-
WARNING: Before beginning any service procedure in this article, refer to Safety Warnings in General Information. Failure to follow this instruction may result in serious personal injury.
Refer to: Engine Cooling System Health and Safety Precautions .
- Refer to: Cooling System Draining, Filling and Bleeding .
-
NOTE: Be prepared to capture escaping fluid.
Use the General Equipment: Hose Clamp Remover/Installer
- Use the General Equipment: Hose Clamp Remover/Installer
Torque: 89 lb.in (10 Nm)