LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2018 >> Fusion Energi Titanium >> Repair and Diagnosis >> Engine Mechanical >> Cooling System (Mechanical) >> ENGINE COOLING SYSTEM - 2.0L DURATEC - HYBRID/ENERGI (103kW/140PS) (UA) >> Removal And Installation >> Degas Bottle >> Removal

Degas Bottle: Removal

NOTE: Removal steps in this procedure may contain installation details.
  1. WARNING: Before beginning any service procedure in this article, refer to Safety Warnings in General Information. Failure to follow this instruction may result in serious personal injury.

    Refer to: Engine Cooling System Health and Safety Precautions .

  2. GFD198090Courtesy of FORD MOTOR COMPANY
  3. Use the General Equipment: Hose Clamp(s)
    GFD198091Courtesy of FORD MOTOR COMPANY
  4. Torque: 80 lb.in (9 Nm)
    GFD198092Courtesy of FORD MOTOR COMPANY