LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2018 >> Fusion Energi Titanium >> Repair and Diagnosis >> Engine Mechanical >> Cooling System (Mechanical) >> ENGINE COOLING SYSTEM - 2.0L DURATEC - HYBRID/ENERGI (103kW/140PS) (UA) >> Removal And Installation >> Degas Bottle >> Installation

Degas Bottle: Installation

  1. To install, reverse the removal procedure.
  2. Fill the cooling system through the degas bottle to the MAX line.

    Material: Motorcraft ® Orange Prediluted Antifreeze/Coolant / VC-3DIL-B (WSS-M97B44-D2)

  3. Perform the cooling system bleed procedure. Refer to: Cooling System Draining, Filling and Bleeding .
scientia non olet · About LEMON Manuals