LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2018 >> Fusion Energi Titanium >> Repair and Diagnosis >> Engine Mechanical >> Cooling System (Mechanical) >> ENGINE COOLING SYSTEM - 2.0L DURATEC - HYBRID/ENERGI (103kW/140PS) (UA) >> Removal And Installation >> Coolant Pump >> Installation

Coolant Pump: Installation

  1. NOTE: Three 2-piece grommet (a rubber overmolded aluminum torque limiter and a black rubber ring) assemblies must be present on the electric coolant pump before assembling it to the bracket.
    GFD198075Courtesy of FORD MOTOR COMPANY
  2. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals