LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2018 >> Fusion Energi Titanium >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Front End Body Panels - Fusion (Hybrid/ENERGI) >> Removal And Installation >> Fender Splash Shield >> Removal

Fender Splash Shield: Removal

NOTE: LH (left-hand) displayed, RH (right-hand) similar.
  1. Remove the wheel and tire. Refer to: Wheel and Tire .
  2. Remove the nuts.
    GFD199073Courtesy of FORD MOTOR COMPANY
  3. Remove the screws.
    GFD199074Courtesy of FORD MOTOR COMPANY
  4. Remove the screws.
    GFD199075Courtesy of FORD MOTOR COMPANY
  5. Remove the screws.
    GFD199076Courtesy of FORD MOTOR COMPANY
  6. Remove the pin-type retainers.
    GFD199077Courtesy of FORD MOTOR COMPANY
  7. Remove the fender splash shield.
    GFD199078Courtesy of FORD MOTOR COMPANY
scientia non olet · About LEMON Manuals