LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2018 >> Focus Titanium, 4D Hatchback >> Repair and Diagnosis >> Suspension >> Rear Suspension >> Rear Suspension (Except Electric Vehicle) >> Removal And Installation >> Wheel Bearing and Wheel Hub >> Installation

Wheel Bearing and Wheel Hub: Installation

  1. Install the wheel bearing and wheel hub and install the new wheel bearing and wheel hub bolts in the sequence shown.

    Torque

    : 81 lb.ft (110 Nm)

    GFD264243Courtesy of FORD MOTOR COMPANY
  2. Connect the wheel speed sensor electrical connector.
    GFD264241Courtesy of FORD MOTOR COMPANY
  3. Install the brake disc. Refer to: Brake Disc .
scientia non olet · About LEMON Manuals