LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2018 >> Focus Titanium, 4D Hatchback >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrumentation, Message Center And Warning Chimes (Except Electric) (2 Of2) >> Diagnosis And Testing >> Instrumentation, Message Center and Warning Chimes >> Pinpoint Tests >> Pinpoint Test K : The Temperature Gauge Is Inoperative >> Notes

Pinpoint Test K : The Temperature Gauge Is Inoperative: Notes

Normal Operation and Fault Conditions 

See Temperature Gauge. REFER to: INSTRUMENT PANEL CLUSTER (IPC) - SYSTEM OPERATION AND COMPONENT DESCRIPTION

NOTE: If DTC U0100:00 sets in the IPC, other observable symptoms can be an inoperative tachometer, speedometer or odometer.

If the BCM does not receive the engine coolant temperature message from the PCM for more than 5 seconds, the BCM and IPC set DTC U0100:00.

If the IPC does not receive the engine coolant temperature message from the BCM for more than 5 seconds, the IPC defaults the temperature gauge to cold (C).

Possible Sources 

scientia non olet · About LEMON Manuals