LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2018 >> Focus Titanium, 4D Hatchback >> Repair and Diagnosis >> Accessories & Equipment >> Communication Devices >> MULTIFUNCTION Electronic Modules (Except Electric) >> General Procedures >> Transport and Factory Mode Deactivation

Transport and Factory Mode Deactivation

For information on Ford Color Coded Illustrations refer to OEM COLOR CODING

Deactivation 

WARNING: Before beginning any service procedure in this article, refer to Safety Warnings in GENERAL INFORMATION (EXCEPT ELECTRIC) . Failure to follow this instruction may result in serious personal injury.
  1. Refer to: Health and Safety Precautions .
  2. Place the ignition in the OFF position.
  3. Verify the battery is fully charged. Refer to: Battery .
  4. NOTE: On vehicles with Push-Button Start, place a programmed passive key in the PATS backup starting location.

    Place the ignition in the ON position.

  5. NOTE: Steps 5 and 6 must be carried out within 10 seconds.

    Press and release the brake pedal 5 times.

  6. Press and release the hazard switch 2 times (on, off).
  7. NOTE: When exiting Factory mode, the IPC message center will indicate NORMAL MODE when the procedure has been successfully completed.

    Place the ignition in the OFF position.

scientia non olet · About LEMON Manuals