LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2018 >> Focus SEL, 4D Hatchback >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 4 (Engine Cooling - 1.0L ECOBOOST (92KW/125PS)) >> Removal And Installation >> Degas Bottle >> Installation

Degas Bottle: Installation

WARNING: This page is about a different variant/trim than selected.
  1. To install, reverse the removal procedure.
  2. Fill the degas bottle with the recommended coolant mixture and fill level.

    Material: Motorcraft® Orange Prediluted Antifreeze/Coolant / VC-3DIL-B (WSS-M97B44-D2)

  3. Install the pressure relief cap until at least one audible click is heard.
GFD266760Courtesy of FORD MOTOR COMPANY
scientia non olet · About LEMON Manuals