Roll Restrictor RH - 2.3L EcoBoost (257kW/350PS) - MI4: Installation
WARNING: This page is about a different variant/trim than selected.
- Install the roll restrictor.
- Install the roll restrictor and the forward studbolt.
Torque
: 59 lb.ft (80 Nm)
- Install the studbolt, the bolt and tighten.
Torque
: 59 lb.ft (80 Nm)
 Courtesy of FORD MOTOR COMPANY
|
- Install the bolts.
Torque
: 92 lb.ft (125 Nm)
 Courtesy of FORD MOTOR COMPANY
|
 Courtesy of FORD MOTOR COMPANY
|
- Install the underbody shield.
 Courtesy of FORD MOTOR COMPANY
|