LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2018 >> Focus SEL, 4D Hatchback >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 38 (Manual Transmission - 6-Speed Manual Transmission - B6) >> Removal And Installation >> Neutral Position Sensor >> Removal

Neutral Position Sensor: Removal

WARNING: This page is about a different variant/trim than selected.
NOTE: Removal steps in this procedure may contain installation details.
  1. Remove the air cleaner. Refer to: Air Cleaner .
  2. Disconnect the neutral position sensor electrical connector.
    GFD268796Courtesy of FORD MOTOR COMPANY
  3. Remove the bolt and the neutral position sensor.

    Torque

    : 97 lb.in (11 Nm)

GFD268797Courtesy of FORD MOTOR COMPANY
scientia non olet · About LEMON Manuals