3rd-4th Gear Synchronizer: Notes

WARNING: This page is about a different variant/trim than selected.

For information on Ford Color Coded Illustrations refer to OEM COLOR CODING

Special Tool(s) / General Equipment

Courtesy of FORD MOTOR COMPANY	205-199 (T83T-3132-A1) Installer, Spindle/Axle Shaft T83-4000-A TKIT-1983-F TKIT-1983-FLM TKIT-1983-FX
Courtesy of FORD MOTOR COMPANY	205-D015 (D80L-630-4) Step Plate
Courtesy of FORD MOTOR COMPANY	211-014 Remover, Steering Wheel
Courtesy of FORD MOTOR COMPANY	307-003 (T57L-500-B) Holding Fixture, Transmission
Courtesy of FORD MOTOR COMPANY	307-680 Table, Assembly (DPS6) TKIT-2010D-FLM TKIT-2010D-ROW
Courtesy of FORD MOTOR COMPANY	308-847 Installer, Inputshaft Seal
Courtesy of FORD MOTOR COMPANY	308-880 Installer, Driveshaft Seal
Hydraulic Press
Hot Air Gun
Punch
Adhesive Tape
Bearing Separator

Materials

Name	Specification
Motorcraft® Gasket Maker TA-16	WSK-M2G348-A5
Motorcraft® Dual Clutch Transmission Fluid XT-11-QDC	WSS-M2C200-D2
Motorcraft® Silicone Brake Caliper Grease and Dielectric Compound XG-3-A	ESE-M1C171-A