Transmission Draining and Filling
WARNING: This page is about a different variant/trim than selected.
For information on Ford Color Coded Illustrations refer to OEM COLOR CODING
Special Tool(s) / General Equipment
| Fluid Suction Gun |
|---|
Materials
| Name | Specification |
|---|---|
| Motorcraft® Dual Clutch Transmission Fluid XT-11-QDC | WSS-M2C200-D2 |
Draining
- With the vehicle in NEUTRAL, position it on a hoist. Refer to: Jacking and Lifting - Overview .
- Remove the underbody shield.
- Drain the transmission.
Torque
: 30 lb.ft (40 Nm)
Filling
- Remove the fill plug.
- Fill the transmission through the fill hole until it is level with the bottom of the fill hole.
Material
: Motorcraft® Dual Clutch Transmission Fluid / XT-11-QDC (WSS-M2C200-D2)
- Drain fluid from the fill hole. Use the General Equipment: Fluid Suction Gun
Volume
: 0.53qt (500ml)
- Install the fill plug.
Torque
: 30 lb.ft (40 Nm)
- Install the underbody shield.